硬件和射频工程师

 找回密码
 立即注册
查看: 1078|回复: 4

Base_ASI16.64.000-32&64_wint_1of1

[复制链接]
发表于 2014-9-26 01:22:00 | 显示全部楼层 |阅读模式
http://pan.baidu.com/s/1kToiYV1

http://pan.baidu.com/s/1kToiYV1# ... 52016.6%252FASI16.6
DATE: 9-19-2014  HOTFIX VERSION: 002            
===================================================================================================================================            
CCRID    PRODUCT     PRODUCTLEVEL2     TITLE
===================================================================================================================================            
1310730    3D_EM       ENG        Generate 3D mesh crash
1313431    3D_EM       GUI        Cut and stitch option of 3DEM
1307785    ASI_PI     GUI        Decap Configuration GUI does not update until you deselect then select GND            
1278238    POWERDC     ENG_ELECTRICAL    PowerDC report Block diagram
1304038    POWERDC     ENG_ELECTRICAL    Vias with overlapping copper - wrong via current result
1308838    POWERDC     ENG_ELECTRICAL    PowerDC simulation hang on 100%
1312736    POWERDC     ENG_THERMAL      PowerDC ET cosim fails            
1238318    POWERSI     OTHER      S-parameter plots can be varied depending on PSI version
1279123    POWERSI     OTHER      PowerSI batch mode command
1305312    POWERSI     GUI        Setup port pane takes 18 sec too long compare to previous version
1306252    POWERSI     ENG        4 Different Inductances (Impedances) are obtained from PSI version 12.0, 12.1, 13.0 and 14.0
1307368    POWERSI     ENG        Error in PowerSI for DC calculation with PowerDC
1308785    POWERSI     ENG        PowerSI - Internal Warning E3302 Undefined error
1308839    POWERSI     OTHER      Option to wait for license in a queue based batch mode running of PSI PDC BBS
1309711    POWERSI     ENG        Significant difference in impedance value in PowerSI version 16.63 and 16.62
1313257    POWERSI     GUI        PowerSI Impedance Plot Display
1313994    POWERSI     ENG        Mismatched Z results in PowerSI V16.63 VS V16.64
1314038    POWERSI     GUI        Vias are created after saving spd file
1314144    POWERSI     ENG        Multi Structure simulation is not progressing by v14.0.2.08141            
1297035    SPEED2000     GUI_SPDGEN      SystemSI PBA Layout will not extract using SPDGEN
1308141    SPEED2000     GUI_SPDGEN      SI Metrics Result Display Not updating
1309133    SPEED2000     GUI_SPDGEN      Defining stimulus pattern
1311897    SPEED2000     GUI_SPDSIM      DDR threshold value issue
1312583    SPEED2000     ENG_SPDSIM      Inconsistent RX results from 2 simulation engines            
1306950    SYSTEMSI     GUI_TESTBENCH    Please lift restriction that at least one Rx IBIS model is required
1287152    T2B       OTHER      T2B gets abnormal end at IBIS Plus setting
1292309    T2B       DOC        Please update .t2b File Format Reference Guide
1308023    T2B       OTHER      T2B crashed when generate PLUS model at v14.0.2.07181            
1301045    TRANSLATOR     SPDLINKS      Missing PWR plane when translating a BRD file
1314747    TRANSLATOR     CR5K2SPD      Support "Remove Non Functional pads" option
1316045    TRANSLATOR     SPDLINKS      Open nets created when translating an MCM file
1316212    TRANSLATOR     SPDLINKS      Anti-pads not in the original mcm file were created when translating an MCM file            
1300351    XTRACTIM     OTHER      XtractIM-EPA: Issue about Pin Groups area in Grouped Pins Property
1302576    XTRACTIM     ENG        Linux hangs when running EPA in XtractIM
            
DATE: 8-22-2014  HOTFIX VERSION: 001            
===================================================================================================================================            
CCRID    PRODUCT     PRODUCTLEVEL2     TITLE
===================================================================================================================================            
1292437    ASI_SI     GUI        Topology about DDR_CLK0_P and _N can not be extracted in APSI
1295310    ASI_SI     GUI        DecapGenerator.exe GUI misspelled Manufacturer
1306879    ASI_SI     OTHER      Opening all xxx.sim after sweep simulation does not work correctly with allegro Sigrity SI Base.            
1294854 OPTIMIZEPI     ENG        Script error message while creating sign-off Report            
1289946    POWERDC     ENG_ELECTRICAL    Display results for the components in result table
1293076    POWERDC     GUI_THERMAL      Export thermal setting of components into CSV file for reuse
1305641    POWERDC     OTHER      Fix a bug related to generate block diagram in sign-off report            
1293285    POWERSI     GUI        Turned pad after shape processing
1294605    POWERSI     ENG        PowerSI crashes while extracting the DC point through PowerDC
1302465    POWERSI     ELECTRICAL_CHECKS    Impedance Overlay in Layout does not work properly            
1277963    SPEED2000     GUI_SPDGEN      Support different simulation frequency for different netin a simulation
1290038    SPEED2000     GUI_SPDGEN      The data pattern only support maximum 64 bit in S2K.
1303503    SPEED2000     ENG_SPDGEN      SPEED2000 sim waveform difference between 12.1.2 and 14.0.2            
1297281    SYSTEMSI     GUI_SLA      Multiple Tx driver produces different results between SPDSIM and HSPICE
1306953    SYSTEMSI     GUI_TESTBENCH    Support 3-STATE IBIS models in Testbench            
1295295    TRANSLATOR     BRD2SPD      When load a brd file into PowerSI, some pads were incorrectly rotated            
    XTRACTIM     ENG        By default, coupled line parameter criteria of 2% coupling and 100ps Rise Time are now applied for all nets in new simulation
DATE: 7-25-2014  UPDATE VERSION: 004            
===================================================================================================================================            
CCRID    PRODUCT     PRODUCTLEVEL2     TITLE
===================================================================================================================================            
1179055    3D_EM       GUI        RLGC plot legend is showing wrong information for diff pairs        
1272892    ASI_SI     SPDIF      SI/PI-Base: Some items in SPDLinks Preference page do not work
1287995    ASI_SI     SPDIF      PowerSI crashed when open an mcm file directly        
1291813    BROADBAND_SPICEENG        Broadbandspice 13.0.2.03301 does not save license tick            
1227079    POWERDC     ENG_ELECTRICAL    Low CPU usage rate in PowerDC
1278731    POWERDC     OTHER      Enhancement request for new TCL to select resistance measurement mode
1283153    POWERDC     GUI_THERMAL      PowerDC Workflow Steps Disabled
1285935    POWERDC     GUI_THERMAL      Incorrect ambient temperature reported in PowerDC report   
1132375    POWERSI     GUI        Export to Image File does not work on zoomed images
1152594    POWERSI     GUI        Transform stackup by nodes function --- NG
1155234    POWERSI     GUI        Network Parameter Display: "Export to Image File" doesn't be saved zoomed images
1188062    POWERSI     OTHER      Default setup/workflow required to generate the S-Parameter from PowerSI
1218546    POWERSI     OTHER      New TCL command for closing S-parameter file in display
1219500    POWERSI     ENG        convert the narrow shape to trace automatically
1225367    POWERSI     ENG        The issue about the additional negative node effect in the PowerSI
1256030    POWERSI     GUI        Multiple value field error in a stackup menu
1260657    POWERSI     GUI        Merge layout issue
1277866    POWERSI     ENG        Port setup error (E2032) when extracting diff pairs
1278918    POWERSI     OTHER      TCL command for Enabling "PowerDC Option" in PowerSI
1284646    POWERSI     ENG        PowerSI (13.0.2.04241) crash issue on Windows
1286211    POWERSI     GUI        Antipad cannot get correctly result in both PowerSI&SPEED2000
1290101    POWERSI     ENG        PowerSI Mesh error E1201
1290361    POWERSI     ELECTRICAL_CHECKS    Impedance/Coupling data is not displayed in the window
1290885    POWERSI     ELECTRICAL_CHECKS    Supporting multiple passive components for Trace Coupling calculation
1294165    POWERSI     OTHER      Decap model assignment through a 12.x TCL script creates a extra node in circuit
1264081    POWERSI     ENG        The different results on reverse the pin linkage number in PowerSI
1287496    POWERSI     ENG        PowerSI simulation error        
1090299    SPEED2000     GUI_SPDGEN      Missing TX direction from U4D1 to J4A3
1225972    SPEED2000     GUI_SPDGEN      Enhancement - Impedance Check Report - min/max impedance percentage
1245196    SPEED2000     GUI_SPDGEN      The bug of impedance plot in PowerSI
1263920    SPEED2000     ENG_SPDGEN      Metric Check got flatten waveforms
1264030    SPEED2000     ENG_SPDSIM      SPEED2000 SI Metric Module takes much longer time to sim
1265801    SPEED2000     ENG_SPDGEN      Simulation result was wrong when we chose the driver package model
1286609    SPEED2000     ENG_SPDSIM      Lack reference plane
1288573    SPEED2000     ELECTRICAL_CHECKS    Impedance Checking failed to detect CPW structure
1289109    SPEED2000     GUI_SPDGEN      Shorts in the layout when Import in to Sigrity Tools
1275268    SPEED2000     ENG_SPDSIM      SPEED2000 crashes in power noise simulation
                    Improve file reading efficiency in spice mode        
1209374    T2B       GUI        Support tr0 waveform display
1216190    T2B       ENG        Voltage range for I-V tables in IBIS by T2B
1265456    T2B       ENG        C_Comp ratio b/w Pullup and Pulldown
1284945    T2B       ENG        [Derate ramp] parameter usage
1285574    T2B       ENG        [C_Comp View] does not create the plot file
1287130    T2B       ENG        Calculation of T2B Minimum (Vhigh-Vlow)/voltage_range
1287152    T2B       OTHER      T2B gets abnormal end at IBIS Plus setting
1288011    T2B       ENG        T2B will be crashed with "Combine package model" operation
1292415    T2B       DOC        T2B: about [By Transient] Keyword
                    Disable Spectre call on Windows platform, error message will output
1294546    TRANSLATOR     SPDLINKS      Translation of one mcm file created short/open circuits
1292253    XTRACTIM     ENG        Linux_XIM_13.0.2.04181 taking 1e6-cpusec_runtime
            
回复

使用道具 举报

发表于 2014-9-26 08:37:00 | 显示全部楼层
谢谢分享!
回复 支持 反对

使用道具 举报

发表于 2014-9-26 08:56:00 | 显示全部楼层
这么快?可以用吗?
回复 支持 反对

使用道具 举报

发表于 2014-9-27 20:34:00 | 显示全部楼层
谢谢
回复 支持 反对

使用道具 举报

发表于 2014-9-30 16:01:00 | 显示全部楼层
好东西,感谢。
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|硬件和射频工程师  

GMT+8, 2018-4-26 02:01 , Processed in 0.299263 second(s), 22 queries .

Powered by Discuz! X3.2

CoprRight © 20011-2014 hwrf.com.cn

快速回复 返回顶部 返回列表