硬件和射频工程师

 找回密码
 立即注册
查看: 266|回复: 2

TDR simulations in HFSS

[复制链接]
发表于 2012-10-12 00:00:00 | 显示全部楼层 |阅读模式
易迪拓培训微波射频和天线设计培训
Hi,

I am simulating a multilayer semiconductor wave guide structure with metal on top  in HFSS which is a straight wave guide  as shown in picture 1.

I have to do impedance measurement  using TDR but I dont understand how does it work. I am doing the interpolating sweep and normalizing the ports too which are the requirements to do TDR in HFSS (according to HFSS help).But is it the right way to do it?

Another question is that after normalization of port with 50 ohms the port impedance should be 50 on all the frequncies but in my simulation it jumps to 51.4 ohm at dc frequency i.e. 0.01 GHz

I am attaching both the TDR Impedance plot (measured using TDR) and also the port Impedance plot (after normalizing).

I dont understand how to read this TDR impedance graph...mainly the significance of this graph .

Kindly reply, I am really in need of help

Usman      







回复

使用道具 举报

发表于 2016-6-29 09:23:30 | 显示全部楼层
易迪拓培训微波射频和天线设计培训
看不懂英语!
回复 支持 反对

使用道具 举报

发表于 2016-6-29 09:31:03 | 显示全部楼层
易迪拓培训微波射频和天线设计培训
1.占空比设成100%。
2.上升沿设置短点
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|硬件和射频工程师  

GMT+8, 2018-7-23 00:29 , Processed in 0.214470 second(s), 21 queries .

Powered by Discuz! X3.2

CoprRight © 20011-2014 hwrf.com.cn

快速回复 返回顶部 返回列表