硬件和射频工程师

 找回密码
 立即注册
查看: 281|回复: 1

Assigning waveguide port in CST

[复制链接]
发表于 2014-10-7 00:00:00 | 显示全部楼层 |阅读模式
易迪拓培训微波射频和天线设计培训
Hi everyone,
I'm designing a microstripline in CST for which I need to assign a port in order to simulate the design at different frequencies. Now in order to set a similar condition as in real life, I need to use a port at 50ohm characterestic impedance. I'm going to use an sma port during fabrication. Hence how can I account for a 50ohm waveguide or discrete port in CST? I'm also unsure whether a waveguide port or a discrete port is more suitable in this case.
Many Thanks in advance!
回复

使用道具 举报

发表于 2014-10-7 00:00:00 | 显示全部楼层
易迪拓培训微波射频和天线设计培训
You can set the impedance using a discrete port (take S-parameter port, you can then set the impedance directly). But it will become inaccurate if the guide is a few wavelengths or larger.
With the waveguide port you'll get the impedance defined by the geometry of the guide and the mode you inject. You can optimize it to the value you want by changing the geometry (e.g. use the optimizer or a parameter sweep and record the line impedance).
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|硬件和射频工程师  

GMT+8, 2018-6-25 16:19 , Processed in 0.214737 second(s), 22 queries .

Powered by Discuz! X3.2

CoprRight © 20011-2014 hwrf.com.cn

快速回复 返回顶部 返回列表