硬件和射频工程师

 找回密码
 立即注册
查看: 835|回复: 3

HFSS Eigenmode solver

[复制链接]
发表于 2014-9-29 00:00:00 | 显示全部楼层 |阅读模式
易迪拓培训微波射频和天线设计培训
I want to solve for the cavity resonances are in a housing using HFSS. I setup the Eigenmode solver and ran the simulation.

The solution data shows tabular frequencies for each mode. What other information should I get from this simulation that would be useful? Are there any plots I should create?
回复

使用道具 举报

 楼主| 发表于 2014-10-9 00:00:00 | 显示全部楼层
易迪拓培训微波射频和天线设计培训
Hi RFMWENG,

If your cavity is bounded by discrete edges (e.g., it's a metal box), then the eigenmode solver will get you the resonant frequencies of each mode. Assuming you have a single design, that should be all of the information you need in terms of cavity resonances.      
  
回复 支持 反对

使用道具 举报

 楼主| 发表于 2014-10-10 00:00:00 | 显示全部楼层
易迪拓培训微波射频和天线设计培训
Is there a way to find the magnitude of the resonances for plotting purposes?

Here's an example of the structure I'm simulating (with and without a lid)


      
  
回复 支持 反对

使用道具 举报

 楼主| 发表于 2014-10-10 00:00:00 | 显示全部楼层
易迪拓培训微波射频和天线设计培训
Hi RFMWENG,

The magnitude of the fields at these frequencies will depend on how they are being excited. In order to model this, you need to switch to a driven modal simulation and excite fields however you think is most realistic. The simulation result will be the steady state-fields, from which you can extract the field magnitudes.

Good Luck
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|硬件和射频工程师  

GMT+8, 2018-12-11 08:50 , Processed in 0.312806 second(s), 19 queries .

Powered by Discuz! X3.2

CoprRight © 20011-2014 hwrf.com.cn

快速回复 返回顶部 返回列表