硬件和射频工程师

 找回密码
 立即注册
查看: 155|回复: 0

Maxwell 3D for silicon detectors

[复制链接]
发表于 2014-10-10 00:00:00 | 显示全部楼层 |阅读模式
易迪拓培训微波射频和天线设计培训
Hello! I am new to Maxwell 3D and i would like to use this software to extract sth like the picture below




The geometry of the device looks like this



The cathode and the three strips are made of aluminium
I have made the design and i have define the materials. I also set some excitations: 1V in the central strip, 0V in the rest of the strips and the cathode. I dont know if i have to define some boundary conditions and how to set the parameters two extract the first image i uploaded. And sth else, the solution type i selected was electrostatic. is that ok?

Thank you in advance
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|硬件和射频工程师  

GMT+8, 2018-1-23 10:05 , Processed in 0.155643 second(s), 23 queries .

Powered by Discuz! X3.2

CoprRight © 20011-2014 hwrf.com.cn

快速回复 返回顶部 返回列表