硬件和射频工程师

 找回密码
 立即注册
查看: 582|回复: 5

how to make Pspice model with the txt file.

[复制链接]
发表于 2014-10-8 00:00:00 | 显示全部楼层 |阅读模式
Hi, i need to make a Pspice part for simulation. the Maker company only gives this data.  

  Code: *Jun 01, 2010 *Doc. ID: 90412, Rev. A *File Name: part irfl9014_PS.txt and part irfl9014_PS.spi *This document is intended as a SPICE modeling guideline and does not *constitute a commercial product data sheet. Designers should refer to the *appropriate data sheet of the same number for guaranteed specification *limits. .SUBCKT irfl9014 1 2 3 ************************************** * Model Generated by MODPEX * *Copyright(c) Symmetry Design Systems* * All Rights Reserved * * UNPUBLISHED LICENSED SOFTWARE * * Contains Proprietary Information * * Which is The Property of * * SYMMETRY OR ITS LICENSORS * *Commercial Use or Resale Restricted * * by Symmetry License Agreement * ************************************** * Model generated on Oct 22, 96 * MODEL FORMAT: SPICE3 * Symmetry POWER MOS Model (Version 1.0) * External Node Designations * Node 1 -> Drain * Node 2 -> Gate * Node 3 -> Source M1 9 7 8 8 MM L=100u W=100u * Default values used in MM: * The voltage-dependent capacitances are * not included. Other default values are: * RS=0 RD=0 LD=0 CBD=0 CBS=0 CGBO=0 .MODEL MM PMOS LEVEL=1 IS=1e-32 +VTO=-3.87971 LAMBDA=0.0503704 KP=0.713612 +CGSO=2.47152e-06 CGDO=1e-11 RS 8 3 0.116837 D1 1 3 MD .MODEL MD D IS=5e-21 RS=0.15039 N=1.5 BV=60 +IBV=10 EG=1.2 XTI=4 TT=1e-07 +CJO=4.40194e-10 VJ=1.63887 M=0.440757 FC=0.5 RDS 3 1 600000 RD 9 1 0.0001 RG 2 7 9.4415 D2 5 4 MD1 * Default values used in MD1: * RS=0 EG=1.11 XTI=3.0 TT=0 * BV=infinite IBV=1mA .MODEL MD1 D IS=1e-32 N=50 +CJO=1.96085e-10 VJ=0.665506 M=0.480463 FC=1e-08 D3 5 0 MD2 * Default values used in MD2: * EG=1.11 XTI=3.0 TT=0 CJO=0 * BV=infinite IBV=1mA .MODEL MD2 D IS=1e-10 N=0.4 RS=3.00002e-06 RL 5 10 1 FI2 7 9 VFI2 -1 VFI2 4 0 0 EV16 10 0 9 7 1 CAP 11 10 6.62636e-10 FI1 7 9 VFI1 -1 VFI1 11 6 0 RCAP 6 10 1 D4 6 0 MD3 * Default values used in MD3: * EG=1.11 XTI=3.0 TT=0 CJO=0 * RS=0 BV=infinite IBV=1mA .MODEL MD3 D IS=1e-10 N=0.4 .ENDS irfl9014 I made a model by model editor.

getting errors. like

                                                           INFO(ORPSIM-15423): Unable to find index file irfl9014.ind for library file irfl9014.lib.

INFO(ORPSIM-15422): Making new index file irfl9014.ind for library file irfl9014.lib.

Index has 0 entries from 1 file(s).


ERROR(ORPSIM-15108): Subcircuit IRFL9014 used by X_M1 is undefined                                          
回复

使用道具 举报

发表于 2014-10-9 00:00:00 | 显示全部楼层
Looks like there is some issue with linking the model.
Also I could see there are no line breaks in the model definition you posted.
Probably the lines defining the subckt are getting treated as comments due to asterisk (*).
Get your model in proper format by breaking the lines.      
                                         
回复 支持 反对

使用道具 举报

发表于 2014-10-9 00:00:00 | 显示全部楼层
Hi,

You can find the complete lines on:
http://www.datasheetarchive.com/file...2/irfl9014.lib

The IRFL9014 file:      

IRFL9014.rar (1.1 KB)
        
                                         
回复 支持 反对

使用道具 举报

 楼主| 发表于 2014-10-9 00:00:00 | 显示全部楼层
thank you so much my problem solved.      
  
回复 支持 反对

使用道具 举报

发表于 2014-10-10 00:00:00 | 显示全部楼层
you must go through this.
http://www.google.co.in/url?sa=t&rct...77161500,d.dGc      
                                         
回复 支持 反对

使用道具 举报

 楼主| 发表于 2014-10-10 00:00:00 | 显示全部楼层
thank you so much it helped my problem.
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|硬件和射频工程师  

GMT+8, 2018-10-22 12:28 , Processed in 0.197683 second(s), 22 queries .

Powered by Discuz! X3.2

CoprRight © 20011-2014 hwrf.com.cn

快速回复 返回顶部 返回列表